Mon–Fri: 7am–8pm | Sat: 8am–6pm
844-898-1441

Error library · ELECTROLUX

Cooktop Error codes

15 references below—open any card for meaning, severity, and when to book. Call 844-898-1441 for Electrolux repair or use our scheduler.

Call 844-898-1441 Schedule appointment All appliance families

Indexed codes

15

Brand

Electrolux

Family

Cooktop

Code cards

Tap a code to read the full brief

Severity is a quick triage hint—not a substitute for in-home diagnosis.

E2 Moderate

E2 – Cooktop error code

E2 is another zone-level code—swap pans once to rule out undersized or warped cookware on induction. Contact Electrolux Appliance Experts for repair if every pan fails on that zone—coil or module is suspect.

Open reference
E3 Moderate

E3 – Cooktop error code

E3 may involve voltage or configuration detection on some cooktops—note if the code follows a generator transfer. Contact Electrolux Appliance Experts for repair to verify supply legs and module configuration jumpers where applicable.

Open reference
E4 Moderate

E4 – Cooktop error code

E4 may indicate overtemperature or boil-over detection on radiant or induction zones—clean any spills after the surface has cooled. Contact Electrolux Appliance Experts for repair if a zone never regulates simmer—sensor or element degradation may apply.

Open reference
E5 Moderate

E5 – Cooktop error code

E5 continues module diagnostics—listen for clicking with no heat. Contact Electrolux Appliance Experts for repair before forcing higher power levels that stress IGBTs.

Open reference
E6 Moderate

E6 – Cooktop error code

E6 may flag communication between touch UI and power modules under the glass—moisture from cleaning is a common trigger. Contact Electrolux Appliance Experts for repair to reseat harnesses with glass-safe methods.

Open reference
E7 Moderate

E7 – Cooktop error code

E7 should be treated as a stop-cooking signal until meaning is confirmed in your manual—some files tie it to fan or vent accessory power. Contact Electrolux Appliance Experts for repair with downdraft or vent interlock notes if present.

Open reference
E8 Moderate

E8 – Cooktop error code

E8 may involve internal power supply rails—flickering digits plus E8 suggest supply sag. Contact Electrolux Appliance Experts for repair rather than swapping breakers yourself beyond reset once.

Open reference
E9 Moderate

E9 – Cooktop error code

E9 may indicate a self-check failure in the cooktop—take a photo of the error pattern. Contact Electrolux Appliance Experts for repair to download error history where the platform supports it.

Open reference
ER Moderate

ER – Cooktop error code

ER often means a key is held or stuck on touch models—clean around edges, then dry thoroughly. Contact Electrolux Appliance Experts for repair if ER returns with no touch—moisture ingress or cracked glass may need service.

Open reference
U0 Moderate

U0 – Cooktop error code

U0 family codes (U0–U2) frequently relate to power configuration or line connection detection on induction cooktops—new installs should verify the junction box torque. Contact Electrolux Appliance Experts for repair if U0 appeared right after remodel electrical work.

Open reference
U1 Moderate

U1 – Cooktop error code

U1 may mean a wiring issue, such as a missing neutral—pay attention if other appliances are acting strangely the same day. Contact Electrolux Appliance Experts for repair after an electrician clears the wall circuit if needed.

Open reference
U2 Moderate

U2 – Cooktop error code

Occasionally, the UI retains a sticky error until power is fully removed; persistent errors after a clean reset point to a hardware issue. Contact Electrolux Appliance Experts for repair to confirm ampacity and module settings.

Open reference
H Moderate

H – Cooktop error code

H on many cooktops is a hot-surface indicator tied to residual heat—wait for H to clear before cleaning glass. If H never appears when a radiant zone is visibly hot, contact Electrolux Appliance Experts for repair—sensor issues can mislead users about burn risk.

Open reference
E0 Moderate

E0 – Cooktop error code

E0 on Electrolux cooktops often indicates a general electronics reset condition—power cycle at the breaker, then retry one burner. If E0 returns immediately with no cookware on induction, contact Electrolux Appliance Experts for repair to read module errors before more burners drop offline.

Open reference
E1 Moderate

E1 – Cooktop error code

E1 frequently maps to a specific zone the module cannot drive—note which burner and whether only induction pans are in use. Contact Electrolux Appliance Experts for repair to test coil drive and pan size sensors for that zone only.

Open reference

Scheduling

Book your service appointment

Call Electrolux Appliance Experts for repair at 844-898-1441 or send a request below.

844-898-1441

Request a visit

We’ll follow up shortly to confirm timing and next steps.

What to expect

  • Written estimate before major parts or labor investments
  • Priority routing with same- and next-day windows in many metros
  • Technicians experienced with premium kitchens and laundry installs
  • Coverage notes on qualifying repairs—spelled out on the invoice

Hours

Mon–Fri: 7am–8pm | Sat: 8am–6pm