Mon–Fri: 7am–8pm | Sat: 8am–6pm
844-898-1441

Error library · ELECTROLUX

Range Error codes

17 references below—open any card for meaning, severity, and when to book. Call 844-898-1441 for Electrolux repair or use our scheduler.

Call 844-898-1441 Schedule appointment All appliance families

Indexed codes

17

Brand

Electrolux

Family

Range

Code cards

Tap a code to read the full brief

Severity is a quick triage hint—not a substitute for in-home diagnosis.

F0 Moderate

F0 – Range error code

F0 on a range may clear after a full power cycle; if it returns along with a clock reset, consider power quality issues. Contact Electrolux Appliance Experts for repair to check terminal block torque and neutral integrity.

Open reference
F10 Moderate

F10 – Range error code

F10 on an Electrolux range often means the oven manager halted heat because temperature ramped outside an expected profile—verify the oven sensor is not contacting a rack or foil. Skip foil lining that traps heat against hidden bake elements. Contact Electrolux Appliance Experts for repair to test sensors and relays before you cancel a holiday meal twice.

Open reference
F1 Moderate

F1 – Range error code

F1 on ranges can follow liquid ingress from boiling pots—dry the area, then avoid steam for a day. Contact Electrolux Appliance Experts for repair if keys stay dead—UI replacement may be required.

Open reference
F11 Moderate

F11 – Range error code

F11 on ranges frequently involves touchpanel or communication paths that share space with cooktop spills. Wipe spills after cool-down; do not soak electronics. Contact Electrolux Appliance Experts for repair if digits ghost-type or beep on their own—ribbon damage is common near front vent slots.

Open reference
F13 Moderate

F13 – Range error code

F13 may flag probe circuits on ranges with oven probe jacks—always insert probes straight and fully. Contact Electrolux Appliance Experts for repair if the jack wiggles or the code appears with no probe installed.

Open reference
F30 Moderate

F30 – Range error code

F30 typically indicates an invalid oven sensor reading—possible causes include an open sensor, a short, or resistance outside the expected range. Contact Electrolux Appliance Experts for repair to compare resistance to temperature with a proper oven thermometer.

Open reference
F31 Moderate

F31 – Range error code

F31 continues sensor supervision—note whether dual ovens disagree wildly. Contact Electrolux Appliance Experts for repair to map the error to upper or lower cavities on multi-oven models.

Open reference
F90 Moderate

F90 – Range error code

F90 on ranges with self-clean still demands respect for motorized locks—do not pry doors. Contact Electrolux Appliance Experts for repair if clean aborts every time at lock—interlock testing prevents damaged hooks.

Open reference
F91 Moderate

F91 – Range error code

F91 lock errors on ranges may show only when the oven is hot—thermal expansion shifts strikers. Contact Electrolux Appliance Experts for repair to adjust striker or replace worn latch kits.

Open reference
F92 Moderate

F92 – Range error code

F92 redundant lock mismatch on ranges can follow shipping after a slide-in move—confirm anti-tip bracket is installed before heavy oven loads shift the chassis. Contact Electrolux Appliance Experts for repair to realign lock sets safely.

Open reference
F93 Moderate

F93 – Range error code

F93 on ranges should be documented with whether cooktop burners were in use simultaneously with oven clean attempts—shared controls can cross-report. Contact Electrolux Appliance Experts for repair to read combined error logs.

Open reference
F94 Moderate

F94 – Range error code

F94 may involve cooling fan circuits on ranges where the cooktop shroud shares cooling paths. Contact Electrolux Appliance Experts for repair if fan never spins up during broil.

Open reference
F95 Moderate

F95 – Range error code

F95 continues cooling supervision—check that nothing sits on the cooktop that blocks rear vent grills. Contact Electrolux Appliance Experts for repair before repeated high-temp bakes stress wiring.

Open reference
F96 Moderate

F96 – Range error code

F96 should prompt a pause on self-clean until a technician clears it—combined heat and lock errors escalate quickly. Contact Electrolux Appliance Experts for repair with the exact code sequence if multiple F9x rotate.

Open reference
F97 Moderate

F97 – Range error code

F97 on ranges may appear with convection fan errors—listen for blade contact after a rack bump. Contact Electrolux Appliance Experts for repair to inspect fan blades and shrouds.

Open reference
F98 Moderate

F98 – Range error code

F98 is another high-priority stop in some files—assume unsafe heat until proven otherwise. Contact Electrolux Appliance Experts for repair instead of resetting endlessly.

Open reference
F99 Moderate

F99 – Range error code

F99 on ranges demands professional clearance before more broil or clean—note any acrid smell. Contact Electrolux Appliance Experts for repair to inspect harnesses near oven vent exits.

Open reference

Scheduling

Book your service appointment

Call Electrolux Appliance Experts for repair at 844-898-1441 or send a request below.

844-898-1441

Request a visit

We’ll follow up shortly to confirm timing and next steps.

What to expect

  • Written estimate before major parts or labor investments
  • Priority routing with same- and next-day windows in many metros
  • Technicians experienced with premium kitchens and laundry installs
  • Coverage notes on qualifying repairs—spelled out on the invoice

Hours

Mon–Fri: 7am–8pm | Sat: 8am–6pm